Corrosion, Scale, and Biofouling impacts heat transfer efficiency. Therefore, it is important to identify and adopt solutions for the cooling water system based on the most Cost-Efficient chemistry.
Corrosion
Corrosion causes severe damage to the equipment and reduces equipment life and efficiency. Corrosion Inhibitor is applied to reduce the rate of corrosion and avoid early replacement of tubes and heat exchangers. Corrosion Inhibitor works through precipitation or passivation method. Based on the water chemistry, corrosivity indices, operating conditions and limitations, the type of corrosion inhibitor is established and recommended.
Scaling
Scaling reducing heat transfer efficiency and causing secondary under-deposit corrosion. Scales are cause primarily by the over-saturation of dissolved minerals.
Scale Inhibitors are based on dispersion and distortion chemistries. It increases the solubility of the dissolved solids through charge modification and prevent aggregations by changing the structure of the crystallite.
Biological Fouling
Biological film reduces heat transfer efficiency and causes secondary under-deposit corrosion similar to scaling. In addition, the risk of health-related hazard such as legionella bacteria which is the cause Legionnaries Disease. Microbiological growth leads to biofouling issue (slime or biofilm). Biofilm acts as a thermal barrier which decreases heat transfer, increasing energy cost and under-deposit corrosion occurrence.
Tersus develops and customise solutions for the cooling water treatment through analytical studies of the system, water quality, limitations, and operating conditions.
Chemicals
Corrosion Inhibitors/Corrosion & Scale Inhibitors
TERGUARD 10 Series
- Liquid and Powder Type Stand-alone Corrosion Inhibitors
- Liquid Type Corrosion and Scale Inhibitor (2 in 1)
Scale Inhibitor/Bio-Dispersant
TERGUARD 13 Series
- Liquid Type
Biocide
TERGUARD 15 Series
- Liquid Type
- Solid Type
- Oxidising and Non-Oxidising
Cleaners
TERGUARD XX
- Online scale removal
- Online biofouling removal
Type of Systems:
1. Cooling Tower System
2. Chiller System
3. Process Cooling Water System
4. Hot Water System
Copyright © 2021 Tersus Water - All Rights Reserved.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.